Mold Making Kit - DIY Cloning Powder for Resin Crafting

Create lasting memories with our DIY Cloning Powder Mold Kit, designed for effortless mold-making in resin crafting. This all-inclusive kit allows you to preserve precious moments, such as your baby’s tiny hand or foot, in a durable keepsake that you can cherish for years to come.

**Instructions:**

1. Combine the molding powder with 300 to 320 mL of warm water (3 to 3.2 times the amount of powder). Stir quickly until the mixture reaches a smooth consistency and turns a purple/pink hue. Avoid adding too much water, as this can affect the setting process.

2. After 1 minute, gently immerse your baby’s hand or foot in the purple molding mixture. Ensure it is fully submerged without breaking the surface or touching the container's sides.

3. Keep your baby’s limb as still as possible while the molding mixture sets.

4. Hold their hand or foot in the mold for an additional 240 seconds to allow it to fully set. Carefully and gently remove it from the mold afterward.

5. To facilitate a smooth removal, gently wiggle the limb back and forth to allow air to enter the mold’s opening.

6. Once the hand or foot is free, open the 50g bag of plaster powder and mix it with 80 to 90 mL of warm water (1/3 to 1/2 of the amount of powder). Stir quickly until smooth, avoiding excess water for a stronger casting.

7. Slowly pour the stone powder mixture into the mold, gently jiggling it to ensure the liquid fills all small areas, which helps minimize the risk of trapping air bubbles.

8. After 1 hour, carefully remove the mold from the casting. You may need to use a knife or your hands, but proceed cautiously to avoid damaging the cast.

9. If any powder remains on the surface of the casting, it can be rinsed off with water. Allow the casting to air dry for 24 hours.

10. Once the casting has dried for 24 hours, personalize it by painting it in any color you desire.

**3D Baby Hand & Foot Casting Keepsake Kit:**

This kit is perfect for capturing the essence of babies up to 1 year old and includes:

- A plastic container large enough for fully submerging your baby’s hand or foot (a clear, sturdy plastic bag can also be used if needed).

- A smaller plastic bowl for mixing the stone plaster.

- Mixing spoon, thermometer, and timer.

**Ingredients:**

- 1 x 100g bag of stone plaster

- 1 x 100g bag of molding powder mix

- 300 to 320 mL of warm water for the molding powder

- 80 to 90 mL of warm water for the stone plaster powder

**IMPORTANT:** Avoid adding excess water to the mixtures, as this can hinder proper setting and result in unsuccessful castings.

**Specifications:**

- Material: Powder

- Net content: 100g of cloning powder, 100g of molding powder

- Net weight: 210g

- Gross weight: 213g

- Product sizes: Cloning powder: 10 x 18 x 1 cm; Molding powder: 12.5 x 10 x 1 cm; Gold powder: 4 x 4 x 0.2 cm; Brush: 16.5 x 1 x 1 cm

- Suitable for adults and children

- Ideal for celebrating children’s growth, creating gifts for Valentine’s Day, or DIY decoration projects

- Packing size: 20 x 20 x 2 cm

**What’s in the Box:**

- Cloning powder: 1

- Molding powder: 1

- Gold powder: 1

- Brush: 1

- English instruction manual: 1

Capture the essence of your child's growth with our user-friendly mold kit, perfect for creating cherished keepsakes.